0# Rotor for NDJ-5/8/9S Rotary Viscometer Viscosity Meter Low Viscosity Adapter

Description

Viscometer adapter  0 rotor apply to NDJ-5S NDJ-8S NDJ-9S Rotary viscometer
1: Designed for low viscosity measurement sample
2: The sample volume requires only 25ml
3: cylindral rotor can be accuray calculated shear rates so a detailed analysis of the product.
0No. rotorThat ultra-low viscosity adapter for oponal accessories, use the following:
1Below15mpa.sLiquid selecon0No. rotor, use0No. rotor without protecve frame, will0Number rotor mounted on the attachment screw (counter-clockwise inalled).
2The fixed sleeve set into the lower poron of the cylinder inrument and ghten the sleeve screws.
3Outward te tube (bottom) poured into the20-25Ml of liquid to be measured.
4The outer te tube set into the fixed sleeve and be ght with a te tube and fixing screws, care mu be taken when ghtening the cone of the end of the te tube fixing screw screwed into the triangular groove in the outer upper end of the te tube (the side of the hole can be observed Te tube triangular groove is located circular holes). It can be measured after the te to control the temperature of the liquid.
5, equipped with end external te tube, the bas method as above (except 3), when the outer rotor immersed in the te tube and the outer tube with ring groove as a level line
0# rotor is for material with viscosity 0.01mPa.s -15mPa.s,