IMPERIAL - BM0134-A Stove Board Wall Spacing Kit - FREE USA SHIPPING!

Description

Description
IMPERIAL
WALL SPACER KIT
#BM0134-A
Stove Board Wall Spacing Kit
Used to create air space between the heat shield and the wall or ceiling
Allows a convection flow of air between the heat shield and the combustible surface
Prevents the stove’s heat from reaching the surface behind it
Used to safely reduce minimum wall and ceiling clearances between the heat shield and the wood stove
4 pack contains: 10 spacers, 10 screws (64 mm), 10 anchors
Support your Stove Board 1 inch above floor (Rest on wood blocks or similar spacing material)
Lightly work anchor holes 16’’ apart around perimeter of Stove Board . Locate one anchor in each corner. Do not place any anchors directly behind heating unit
Place wall Stove Board in position and drill 1/4” holes at marked locations around perimeter of shield, drilling at least 1” into the wall at the same time
Remove Stove Board and insert wall anchors into each hole
Reposition Stove Board and align holes
Insert screws through Stove Board, aluminum spacers and into wall anchor. Do all four corners first. Do not tighten screws securely until all screws are in place
When all screws in place, tighten the four corner screws first, then the rest